Specs:
Acoustic Performance
Free Field Frequency Response: +64 Hz 20 kHz (±3 dB)
Lower Cutoff Frequency: +3 dB @ 64 Hz
Upper Cutoff Frequency: +3 dB @ 22 kHz
Sound Pressure Level @ 1 meter, 7.5 dBu into Balanced Input: 100 dB SPL @ 1m
Maximum SPL Per Pair: 113 dB SPL @ 1m

Transducers
Low Frequency: 5.25 in/133 mm with steel frame, polypropylene cone woofer
High Frequency: Wave guide loaded 1 in/25 mm silk dome tweeter

Amplifiers
Low Frequency Power: 60 watts, 4 ohm load, 100 watts peak
High Frequency Power: 60 watts, 4 ohm load, 100 watts peak
Slew Rate: > 15 V/µs
Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
Signal-to-Noise Ratio:
Low Frequency: > 101 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms
High Frequency: > 93 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms
Type: Monolithic IC, Class AB

Electronic Crossover
Crossover Type: 24 dB/octave
Crossover Frequency: 4 kHz
Sensitivity: +4 dBu at 300 Hz for full output
Input Impedance: 20 kO, balanced bridging; 10 kO unbalanced

Equalization
Low Frequency EQ: +2 dB/+4 dB @ 65 Hz, peaking
High Frequency EQ: ±2 dB @ 5 kHz, shelving

AC Power Requirements
US: 120 VAC, 60 Hz
Europe: 240 VAC, 50 Hz
Korea (AC Power Select at 240 V): 220 VAC, 60 Hz
Japan (AC Power Select at 120 V): 100 VAC, 50/60 Hz
AC Connector: 2-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 1.6 A H/250 V
230 VAC: T 800 mA H/250 V
Power Consumption: 80 watts with music, loud mix
20 watts quiescent (idle)

Physical Dimensions and Weight
Enclosure: 0.625 in/16 mm thick MDF with 0.750 in/19 mm MDF front panel
Damping: Adiabatic foam

Dimensions:
Height: 11.3 in/286 mm
Width: 7.6 in/194 mm
Depth: 9.1 in/232 mm
Weight: 17.0 lb/7.7 kg