Installation:
When I started unfolding the setup guide, I kept unfolding, and unfolding and unfolding... This is probably one of the largest single-sheet setup guides I have ever seen! It's all for good fun though, as you can see in my picture below, one side of the manual is a full-size shooting range target body. The other side features setup instructions in a variety of different languages.

 
(Click to enlarge)

Installation itself involves removing the back plastic plate using the included screw driver to remove it's two retention screws. After that, just pull out the internal rubber skin and connect your drive to the interface board inside it. The skin is very malleable so you can easily flex it to fit the drive inside. After that, slide it back inside the enclosure and reattach the back plate!

 
(Click to see enlarged)

When connecting it into a computer you are safe to power it from the included double-ended USB cable. Depending on your system and USB configuration you might not need to use both male USB ends in your computer. For those who are unable to power the drive through USB for any reason, there is a plug on the back of the enclosure for a universal adapter (sold separately at any electronics store).

Testing:
I tested the ammo by running my usual speed benchmarks. Just like any USB drive, it will never perform at the theoretical 480mbps. Performance results are posted below.